Diagnose and configure modules in your Ford Focus 2 or C-Max I using an ELM327 or ELS27 interface. These tools provide CAN-bus access to various vehicle systems.
Supported Modules:
Engine Control Module (ECM): Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for the following engines: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).
Instrument Cluster (Dashboard): Access module information, read and clear DTCs, configure settings, reboot the module, and adjust or correct odometer readings.*
Brake Control Module (BCM): Access module information, read and clear DTCs, configure settings, reboot the module, reset the Dynamic Stability System (DDS) calibration, and perform brake bleeding.*
Body Control Module (BCM): Access module information, read and clear DTCs, configure settings*, and reboot the module.
Supplemental Restraint System (SRS) Module (Safety Module): Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data.*
Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM.*
Climate Control Module (CCM): Access module information, read and clear DTCs.
Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.
*Some features require the full version of the software.
ELM327 Modification: For full functionality and access to additional modules, a minor modification to your ELM327 adapter may be necessary. Instructions can be found here: Http://forffclub.narod.ru/index/0-2
ELS27 Information: Purchase an ELS27 interface here: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT-2, use the ELS27 Baudrate utility to set it to 2,000,000.
